GXP21XX Administration Guide
Config HTTP/HTTPS
Password
The password for the HTTP/HTTPS server.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted prefix will be downloaded and
flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the
configuration file with the matching encrypted postfix will be downloaded and
flashed into the phone.
The password for encrypting XML configuration file using OpenSSL. This is
required for the phone to decrypt the encrypted XML configuration file.
Authenticates configuration file before acceptance. Default setting is "No".
Download Device
Configuration
Click to download phone’s configuration file in .txt format.
Upload Device
Configuration
Upload configuration file to phone.
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS. The default setting is “HTTPS”.
Defines the server path for the firmware server.
Firmware HTTP/HTTPS
User Name
The user name for the HTTP/HTTPS server.
Firmware HTTP/HTTPS
Password
The password for the HTTP/HTTPS server.
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted prefix will be downloaded and flashed into the
phone.
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted postfix will be downloaded and flashed into the
phone.
The URL or IP address of the syslog server for the phone to send syslog to.
Selects the level of logging for syslog. The default setting is "None". There
are 4 levels: DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
Product model/version on boot up (INFO level);
NAT related info (INFO level);
sent or received SIP message (DEBUG level);
SIP message summary (INFO level);
inbound and outbound calls (INFO level);