Grandstream Networks GXP2130v2 User Manual

FIRMWARE VERSION 1.0.0.17 GXP2140/GXP2160 USER MANUAL Page 31 of 79
 Resume. Resume call by pressing the blinking LINE key;
 Multiple calls. Automatically place active call on hold or switch between calls by pressing the LINE
key. Call waiting tone (stutter tone) will be audible on new incoming call during the active call.
MUTE
During an active call, press the MUTE button to mute/unmute the microphone. The LCD will show the Mute
icon on the top of screen, when the call is muted.
CALL TRANSFER
GXP2140/GXP2160 supports Blind Transfer, Attended Transfer and Auto-Attended Transfer.
 Blind Transfer.
 During the first active call, press TRAN key and dial the number to transfer to;
 Press SEND key or # to complete transfer of active call.
 Attended Transfer.
 During the first active call, press LINE key. The first call will be put on hold;
 Enter the number for the second call in the new line and establish the call;
 Press TRAN key;
 Press the other LINE key which is on hold to transfer the call.
 Auto-Attended Transfer.
 Set "Auto-Attended Transfer" to "Yes" under Web GUI->Settings->Call Features. And then click
"Save and Apply" on the bottom of the page;
 Establish one call first;
 During the call, press TRAN key. A new line will be brought up and the first call will be
automatically placed on hold;
 Dial the number and press SEND or # to make a second call. (Once the number is entered, a
"Transfer" soft key will show. If "Transfer" soft key is pressed instead of SEND or #, a blind transfer

Grandstream Networks GXP2130v2 Specifications

General

Brand	Grandstream Networks
Model	GXP2130v2
Category	IP Phone
Language	English