FIRMWARE VERSION 1.0.0.17 GXP2140/GXP2160 USER MANUAL Page 70 of 79
In a web browser, go to www.weather.com;
Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH";
The searching result will show in a new window with URL in the browser's address bar. For example,
http://www.weather.com/weather/today/Boston+MA+USMA0046:1:US
In the above link, USMA0046 is the city code to be filled in "Self-Defined City Code" option.
Users could then further configure the "Update Interval" and "Degree Unit" for weather information
display.
PUBLIC MODE
The GXP2140/GXP2160 supports hot desking using public mode. Under public mode, users could login
the phone with the SIP account User ID and password. Please follow the steps below to configure the
phone for public mode:
Fill up the SIP server address for account 1 first;
Under Web GUI->Settings->General Settings, set "Public Mode" option to "Yes". Click "Save and
Apply" and reboot the phone;
When the phone boots up, SIP User ID and Password to register to the configured SIP server in
account 1 will be required. Enter the correct account information to log in to the phone. When entering
the account information, press softkey "123"/"abc" to toggle input method;
In login page, pressing CONF button on the phone will show phone's IP address;
After using the phone, go to LCD MENU->LogOut to log off the public mode.
EDITING CONTACTS AND CLICK-TO-DIAL
From GXP2140/GXP2160 Web GUI, users could view contacts, edit contacts, or dial out with Click-to-Dial
feature on the top of the Web GUI. In the following figure, the Contact page shows all the added
contacts (manually or downloaded via XML phonebook). Here users could add new contact, edit selected
contact, or dial the contact/number.
Before using the Click-To-Dial feature, make sure the option "Click-To-Dial Feature" under web
GUI->Settings->Call Features is turned on. By default it's disabled and the dialing icon in web GUI is in
grey .
To Next Page
Loading...
Need help?
General
