FIRMWARE VERSION 1.0.0.17 GXP2140/GXP2160 USER MANUAL Page 77 of 79
server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format.
The "Config Server Path" can be the same or different from the "Firmware Server Path".
A configuration parameter is associated with each particular field in the web configuration page. A
parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric
numbers. i.e., P2 is associated with the "New Password" in the Web GUI->Maintenance->Web Access
page->Admin Password. For a detailed parameter list, please refer to the corresponding firmware release
configuration template.
When the GXP2140/GXP2160 boots up or reboots, it will issue a request to download a configuration XML
file named "cfgxxxxxxxxxxxx.xml" followed by a file named "cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the
MAC address of the phone, i.e., "cfg000b820102ab.xml" and "cfg000b820102ab". If the download of
"cfgxxxxxxxxxxxx.xml" file is not successful, the provision program will download a generic cfg.xml file. The
configuration file name should be in lower case letters.
For more details on XML provisioning, please refer to:
http://www.grandstream.com/general/gs_provisioning_guide_public.pdf
To Next Page
Loading...
Need help?
General
