Grandstream Networks GXV3275 - Page 97

Firmware Version 1.0.3.46
GXV3275 Administration Guide
Page 95 of 117
Examples:
(|(telephoneNumber=%)(Mobile=%) returns all records which has the
"telephoneNumber" or "Mobile" field starting with the entered prefix;
(&(telephoneNumber=%) (cn=*)) returns all the records with the
"telephoneNumber" field starting with the entered prefix and "cn" field
set.
LDAP Mail Filter
It is used to configure the filter used for mail lookups.
Example:
(mail=%)
LDAP Displaying Name
Attributes
It is used to configure the entry information to be shown on phone's
LCD. Up to 3 fields can be displayed.
Example:
%cn %sn %telephoneNumber
Max Hits
It is used to configure the maximum number of results to be returned
by the LDAP server. If set to 0, server will return all search results. The
default setting is 50.
Search Timeout (ms)
It is used to configure the interval (in seconds) for the server to process
the request and client waits for server to return. The default setting is
4000 seconds.
LDAP Lookup For Dial
It is used to set if allow the phone system to do the LDAP number
searching when making outgoing calls. The default setting is "No".
LDAP Lookup For Incoming
Call
It is used to set if allow the phone system to do LDAP number searching
for incoming calls. The default setting is "No".
LDAP Dialing Default Account
This is used to configure the default account that being used when
dialing LDAP contact. Users may choose the Account 1-6, the default
setting is “Default”.
Note:
For more information on how to configure LDAP on GXV3275, please refer to the GXV3275 LDAP
Configuration Guide in the following link:
http://www.grandstream.com/products/gxv_series/gxv3275/documents/gxv3275_ldap_book_guide.pdf