FIRMWARE VERSION 1.0.9.1 GXW40XX USER MANUAL Page 18 of 60
BASIC OPERATIONS
UNDERSTANDING GXW VOICE PROMPTS
GXW40XX has a built-in voice prompt menu for simple device configuration. To enter the voice prompt
menu, press *** on the standard analog phone connected to any FXS port.
TABLE 5: DEFINITIONS OF THE GXW VOICE PROMPTS
Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter 01 – 05, 07,10 - 17, 47, 86 or 99 Menu option
“DHCP Mode”, “PPPoE
Mode ”or “Static IP Mode”
Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need configure all the IP
address information through menu 02 to 05. If user selects
“Dynamic IP Mode”, the device will retrieve all IP address
information from DHCP server automatically when user reboots
the device.
“IP Address “ + IP address
The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
“DNS Server “ + IP address
Enter “9” to go to the next selection in the list:
PCM U
PCM A
iLBC
G-726
G-723
G-729
Announces the Mac address of the unit.
Enter “9” to toggle between enabled and disabled
Firmware Server IP
Address
Announces current Firmware Server IP address. Enter 12 digit
new IP address.
Configuration Server IP
Address
Announces current Config Server Path IP address. Enter 12 digit
new IP address.