Grandstream Networks HT812 Administration Guide

P a g e | 29
HT812/HT814 Administration Guide
Version 1.0.9.3
Internet Protocol
Selects one of the following IP protocol modes:
 IPv4 Only: Enforce IPv4 protocol only.
 IPv6 Only: Enforce IPv6 protocol only.
 Both, Prefer IPv4: Enable both IPv4 and IPv6 and prefer IPv4.
 Both, prefer IPv6: Enable both IPv4 and IPv6 and prefer IPv6.
Note: Make sure to reboot the ATA for the changes to take effect.
IPv4 Address
Allows users to configure the appropriate network settings on the HT81x to obtain IPv4
address. Users could select "DHCP", "Static IP" or "PPPoE". By default, it is set to
"DHCP".
 DHCP mode: all the field values for the static IP mode are not used (even
though they are still saved in the flash memory.) The ATA acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.
 Use PPPoE: set the PPPoE account settings. If selected, ATA attempt to
establish a PPPoE session if any of the PPPoE fields is set.
 Static IP mode: configure IP address, subnet Mask, default router IP address,
1
st
preferred DNS server, 2
nd
preferred DNS server. These fields are set to zero
by default.
IPv6 Address
Allows users to configure the appropriate network settings on the HT81x to obtain IPv6
address. Users could select "DHCP", "Static IP”. By default, it is set to "DHCP".
 DHCP mode: all the field values for the static IP mode are not used (even
though they are still saved in the flash memory.) The ATA acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.
 Static IP mode: configure IP address, 1
st
and 2
nd
DNS server, preferred DNS
server. These fields are set to zero by default.
- Full Static: When enabling the option full static, users need to specify the
Static IPv6 and the IPv6 Prefix length.
- Prefix Static: When enabling the option prefix static, users need to specify
the IPv6 Prefix (64 bits).
DHCP hostname
Specifies the name of the client. The name may or may not be qualified with the local
domain name. This field is optional but may be required by ISP.
DHCP vendor class
ID
Exchanges vendor class ID by clients and servers to convey particular configuration or
other identification information about a client. Default is HT8XX.

Grandstream Networks HT812 Specifications

General

Brand	Grandstream Networks
Model	HT812
Category	Telephone Accessories
Language	English