Section X: TBCPage 16
Client name:
Installation address:
Heat pump model:
Installer:
Merchant:
Yes No
Heat pump mounting
Is the outdoor unit mounted allowing correct distances from adjacent
boundaries
Is the outdoor unit correctly installed on the anti-vibration mounts - feet or
arms
Is the outdoor unit mounted level on concrete base
Has condensate drain been connected to soakaway
Plumbing works
Has correct size flow and return pipework been fitted
Have heat pump isolation valves been fitted externally
Is primary flow and return pipework insulated
Have flexible hoses provided with heat pump been fitted
Has the cylinder been fully connected to the heating and plumbing system
Has the heating expansion vessel been secured and charged to correct
pressure
Has the potable expansion vessel been secured and charged to correct
pressure
Are all isolating valves and pump valves open
Has the system been fully purged of air and pressurised to the correct value
Has volumizer/buffer tank been fitted on the return
Has magnetic filter been fitted on the return pipework to heat pump
Has all glycol that has been provided been added to the system
3.12 Installation Checklist
Section 3: Installation Information