XCU eXchangeable Control Unit User’s Guide (v1.6) 37
Chapter 5 - XCU menu reference
Chapter 5
XCU menu reference
5.1 Video menu
Menu item Settings Default Level Stored Description
Colour Bar
Colour Bar Off, On Off User 1 — Turns color bar on or off (when camera signal is
not present)
Bar Type Split, Full Split User 1 Cradle Selects color bar type.
SD Detail
Detail Off, On Off User 1 XCU Turns SD Detail on or off
Source R, G, Y, R+G Y User 1 XCU Selects the source for SD Detail signal
generation.
Level 0..99 25 User 1 XCU Sets overall SD Detail level: amount of detail
added to the SD video signal.
Vertical Lvl 0..99 50 User 1 XCU Sets the level of the vertical component in
the SD Detail signal.
Noise Slicer 0..99 10 User 1 XCU Sets the level of the Noise Slicer.
Coarse/Fine 0..99 90 User 1 XCU Sets SD Detail balance between coarse and fine
structures (0 = coarse, 99 = fine).
Level Dependence 0..99 30 User 1 XCU Sets the SD Detail reduction level for shadow
areas.
Soft Detail Off, On Off User 1 XCU Switches SD Soft Detail on or off. This function
reduces the amount of detail added fo large
transitions.
Soft Detail Lvl 0..99 50 User 1 XCU Sets the maximum limit level of detail for
Soft Detail.
To Next Page
Loading...