52 XCU eXchangeable Control Unit User’s Guide (v1.6)
Chapter 6 - Connectors and signals
6.2.5 Monitoring connectors
6.2.6 Teleprompter connectors
*) This output signal is always looped-through even when the XCU is not mounted.
6.2.7 Reference connectors
*) This output signal is always looped-through even when the XCU is not mounted.
The last loop-through output in a chain must be terminated with a 75 resistor. The maximum
number of XCUs that can be looped through is 6.
Connector Signal
HD-SDI Digital HD-SDI output signal with menu text and indicators inserted.
SDI Digital SDI output signal with menu text and indicators inserted.
CVBS CVBS (analog SD) output signal with menu text and indicators inserted.
Connector Signal
TP in Teleprompter input signal (analog SD)
TP out Teleprompter loop-through* (output) signal
Connector Signal
Ref in Reference input signal (HD Tri-Level sync or SD Black Burst are accepted)
Ref out Reference loop-through*) (output) signal
To Next Page
Loading...