38 XCU eXchangeable Control Unit User’s Guide (v1.6)
Chapter 5 - XCU menu reference
5.2 Monitoring menu
5.3 Audio/Intercom menu
Menu item Settings Default Level Stored Description
Display On, Time Time User 2 XCU Selects the camera menu to be permanently On
or to disappear after a set Time.
Menu time 3..30 10 User 3 XCU Sets the length of time the menu is dis-played
when the Display mode is set to Time.
Statusbar
Camera Number Off, On Off User 1 — Switch on to show the camera number in the
status bar.
Name Off, Alias, Dev ID,
Head ID
Off User 1 — Switch on and select Alias, device ID (of the
XCU) or Head ID (of the connected camera) to
be shown in the status bar.
Cable Info Off, On Off User 1 — Switch on to show transmission cable
information in the status bar.
Menu item Settings Default Level Stored Description
Audio
Audio 1 Level 0dB, 6dB 6dB User 1 — Selects studio audio attenuation level for Audio
input 1.
Audio 2 Level 0dB, 6dB 6dB User 1 — Selects studio audio attenuation level for Audio
input 2
Intercom
Isolate
Isolate Isolate, System System User 1 Cradle Isolate = Isolate Program and Production
intercom from camera head;
System = isolate is off
Eng
Wire Mode 4wire, 2wire 4wire User 1 Cradle Selects wiring mode for the Engineering
intercom channel.
Volt/Cur drive 4wire, 2wire 4wire Service — Selects voltage of current drive mode.
2/4 wire 4wire, 2wire 4wire Service — Selects 2 or 4 wire intercom mode.
Level 0dB, 6dB 6dB User 1 XCU Selects intercom channel attenuation.
Side Tone 0..99 50 User 1 Cradle Sets side tone (feedback) volume level.
Prod
Wire Mode 4wire, 2wire 4wire User 1 Cradle Selects wiring mode for the Production
intercom channel.
Volt/Cur drive 4wire, 2wire 4wire Service — Selects voltage of current drive mode.
2/4 wire 4wire, 2wire 4wire Service — Selects 2 or 4 wire intercom mode.
Level 0dB, 6dB 6dB User 1 XCU Selects intercom channel attenuation.
Side Tone 0..99 50 User 1 Cradle Sets side tone (feedback) volume level.
Prog
To Next Page
Loading...