GRASS VALLEY XCU - Page 43

XCU eXchangeable Control Unit User’s Guide (v1.6) 43
Chapter 5 - XCU menu reference
Transmission Triax, Fiber Triax User 0 — (advanced settings)
Transm. profile
Selection Mode Auto, Manual Auto Service XCU (advanced settings)
Profile 3G Optimal, HD
Optimal, 3G Robot,
HD Robot
3G
Optimal
Service XCU (advanced settings)
Triax
Cable Length <####> — User 0 — (advanced settings)
Cable Status OK, Critic, Error,
NoSig, Unknown
NoSig User 0 — (advanced settings)
Rx Sig.Status OK, Critic, Error,
NoSig, Unknown
NoSig User 0 — (advanced settings)
Tx Sig.Status OK, Critic, Error,
NoSig, Unknown
NoSig User 0 — (advanced settings)
Fiber
Fib A (CAM->XCU)
Cable Status OK, Critic, Error,
NoSig, Unknown
NoSig User 0 — (advanced settings)
Signal Status OK, Critic, Error,
NoSig, Unknown
NoSig User 0 — (advanced settings)
RX Margin — — User 0 — (advanced settings)
CRC Error Count 0..65535 50 Service — (advanced settings)
Fib B (XCU->CAM)
Cable Status OK, Critic, Error,
NoSig, Unknown
NoSig User 0 — (advanced settings)
Signal Status OK, Critic, Error,
NoSig, Unknown
NoSig User 0 — (advanced settings)
RX Margin — — User 0 — (advanced settings)
CRC Error Count 0..65535 50 Service — (advanced settings)
T2F Converter (Triax to Fiber Converter)
Temperature Ok, Unknown,
Critic, Error
Unkno
wn
User 0 — (advanced settings)
FPGA Temp <temp> — Service — (advanced settings)
Fan — — User 0 — (advanced settings)
Cable Power Unknown, Open,
Power Off,
Overload, Short,
Cam Off, Cam On,
Error
Error User 0 — (advanced settings)
Int.Error Unknown, VMtest,
STtest, CStest,
FBtest, Start,
Shutdown,
nonFlex, Family
Unkno
wn
User 0 — (advanced settings)
Package Ok. Not Ok Not Ok User 0 (advanced settings)
Package 12NC 0..65535 0 User 0 (advanced settings)
Package Version 0..65535 0 User 0 (advanced settings)
Menu item Values Default Level Stored Description