183
»Control adjust« (page 78)
0%
+
100%+100%
0% +100%+100%
0% +100%+100% 0.0 0.0
0% +100%+100% 0.0 0.0
ASY
ASYSYM
SEL
SEL
«normal »
9
0.00.0
SYM
12
11
10
9
offset –time+
9.9
9.9
Input
Input
Input
Input
free
free
free
–travel+
… and assigning any switch you like (e. g. “9”) to the
control channel you are using, instead of the pre-
viously selected proportional control – in this case
“CONTROL 5” to channel “9”. You can then set the
desired SYMmetrical or ASYmmetrical time period in
the “-time+” column; this defi nes the time over which
the programmed function is to take effect.
Note:
When assigning switches, please bear in mind at all
times that a single switch can trigger multiple func-
tions. For example, a retractable undercarriage con-
nected to output 6 can be operated by the same
switch used to trigger the time-controlled wheel doors
or the undercarriage searchlight, connected to output
9 – as described in our example.
Programming examples: Fixed-wing model
To Next Page
Loading...
