First contact
IM4 machine . 17
Installing the engraving software in Windows
1. Check that your computer has the minimum required configuration:
PC computer Configuration
Microprocessor Pentium III
Frequency 800 Mhz
Random Access Memory (RAM) 128 MB
1 internal hard disk 10GB with 100 MB free
1 internal CD-ROM drive x24
1 internal 3"
1/2
disk floppy drive
1 mouse Windows compatible
1 keyboard extended (105 keys)
LPT parallel port 1
COM serial port 1
1 graphic board 32000 colors, 16 bits
1 color SVGA monitor 15", 800x600 DPI resolution
Software environment Windows XP
Internet Explorer 5 (or more)
Acrobat Reader 5 (or more)
Microsoft Word 2000 (or more)
Windows Media Player
Arial, Microsoft Sans Serif, Verdana fonts
2. Insert the CD-ROM in the drive and close the drive.
3. Wait until the Installation panel is displayed.
Double-click the driver if the panel is not opening.
4. The installation automatically runs: the Progression bar and panel indicate the course of
operations.
5. Click to quit the Installation panel.
6. Run GravoStyleQuick: click its icon on the Desktop.
7. To engrave a first plate, run the Tutorial.
To Next Page
Loading...
