10
M_XCOM_EN_B
G. Safety
1. Workstationsafety
Personnel safety
Turnothemachinebeforebeginninganycleaning,maintenanceorrepair
procedure.
• TheXCOMmachineisdesignedformarkingapplications.Ifusedforotherpurposes,Gravotechcannot
guarantee the quality of the result. Gravotech is not responsible for damage caused by inappropriate use
of the machine.
• Donotusethismarkingequipmentinanexplosiveenvironment.
• Use the appropriate protection when equipment is used in a polluted environment. Use of these protections
are the user's or the integrator's responsibility.
• Dependingontheapplication(toolingorheavyparts),itisrecommendedtowearsafetyshoesandwork
gloves.
• Atthetimeofdisposal,wearingpersonalprotectiveequipment(PPE)isrecommendedtodismantlethe
mechanical elements of the machine.
• This equipment is not designed for outdoor operation.
• In the event of an emergency, to bring all moving parts to a stop:
-PuttheOn/Oswitchinthe"O"(O)position
or
- Disconnect the power cable.
Handling the machine
• Thismarkingequipmentisdesigned tofunctionata roomtemperaturebetween5 °C(41°F)to45°C
(113°F).
• Thismarkingequipmentisnotdesignedtooperateindamppremises.
• The machine must be handled with extreme caution.
• The machine must be clean and protected from dust. In the event of an extended period of non-use,
unplug the power cable and protect the machine.
• Neverpourorspillliquidonthemachine(drinks,cleaningproducts,etc.)exceptwhererecommendedby
Gravotech.