EasyManua.ls Logo

Gravotech XCOM - USB Host Connector; Ethernet Network Connection

Gravotech XCOM
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Communication
31
M_XCOM_EN_B
4. USB Host connector
-ThisconnectorallowstoconnectaUSBkeyfor:
savingorloading󰘰les
updating the internal program T08
Remarks
ThekeymustbeformattedinFAT32.
The external hard drives cannot be used.
Never remove the key during a transfer between the CCU and the key. Doing so may
destroythe󰄈lesorthekey.
- Supports barcode and 2D code readers for text acquisition.
Inordertoberecognized,thereaderusedmustbesetupfor(HID)keyboardemulation,andUSkeyboard
standardlayout(AmericanQWERTYkeyboard).
Acarriagereturn<CR>attheendofthetextautomaticallycon󰘰rmsthescannedtextwithouttheneedtopress
the touch screen.
5. RJ45 - Ethernet connector
AllowstheEthernetnetworkingofthemachine(10/100Mb/s).
Protocol: TCP/IP, Fixed IP mode Or DHCP.

Table of Contents