Gravotech XCOM - Installation Procedures; Physical Installation

12
M_XCOM_EN_B
I. Installation
1. Physical installation
PositiontheControlUnithorizontally,inadry,ventilatedarea,atleast20cm(7.874in)fromthe󰘱oor.Allow
clearance(connectionsandcables):rightsideofthemachine
MountinghooksforDINrailarelocatedattheback.
Do not obstruct air circulation under the machine. Respect the clearance areas indicated on the drawing.
Clearance dimension
Front panel: 19" 5U
Clearance dimension