Gravotech XCOM - Workbench Support Accessory; 19 5 U Front Panel Accessory; Gravotrace Marking Software; Start;Stop Button Box

Accessories available upon request
35
M_XCOM_EN_B
Ref.
82030 Workbench support with handle
82031 Frontpanel:19"5U
Used to integrate the CCU in a cabinet.
Gravotrace standard marking program
Developed in a Windows environment, this program
combines all the capabilities and user-friendliness of
a PC.
Contact Gravotech.
52717 Button box for start / stop cycle
Thegreenbuttonisusedtolaunchmarking(same
functionasthefootpedal).
The orange button is used to stop either a single
markinginprogressoraseriesofmarkingsbeforeit
reaches the end.
Start cycle foot pedal
Ref. 52712 O󰓑cefootswitch
Asimpletouchofthepedalwilllaunchamarking"n"
times, leaving the operator with both hands free. The
footpedalisnotdesignedtostopmarking.
Ref. 52713 Industrial footswitch
Same use as described above. This foot pedal is
especiallydesignedforindustrialworkenvironmentsor
for high rate production.