Fav
Skywarn
EXPERT BELOW
Delay
Delay Time
AudioBoost
Hit Count
On or Off
When On, the TGRP object is a member of the
Favorites Scan List.
On or Off
When On, the CONV object is a member of the
Skywarn Scan List.
On or Off
Controls whether a Delay is used to wait for reply
traffic after a transmission on the TGRP.
1-200 x 100 mS
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay is On,
e.g., 20=2 seconds.
On or Off
Applies a 6 dB boost to audio levels when the
object is active
Numeric value
Increments each time a transmission is received on
the SWPR object. Global “Hit Counts” must be set
to ON. Press the
Dflt softkey to reset to 0.
0716 User Manual Page 104
To Next Page
Loading...
