GRE 0716 - Page 96

2. Press 0 while the scanner is displaying the Welcome/Owner
screen. The scanner displays
System Tests:
Select a Test...
Exits if no key
is pressed
3. Press
1. The scanner displays
Factory Init
Erase Memory
ENTER if APPROVE
CLEAR to EXIT
4. Press
ENT. The scanner displays
Initializing the
File System
Please Wait.....
Then,
File System
Initialized to
Defaults.
Press any key.
5. Press any key on the keypad to proceed. The scanner will
next display:
GLOB EEPROM area
Initialized to
defaults.
Press any key.
6. Press any key on the keypad to proceed. The scanner will
reboot with file system and global parameters reset to factory
defaults.
0716 User Manual  Page 96