Note: The fresh air unit which is connected with air box will display PM2.5, CO
2
,
indoor humidity and air quality class; when air box is not connected, PM2.5, CO
2
and indoor humidity will display “- -”. Air quality class will be concealed.
（
2
）
Mode setting
Press Mode button to set control mode.
Note: Only the fresh air unit which is connected with air box can set auto mode.
The fresh air unit which is not connected with air box cannot select auto mode.
（
3
）
Fan speed setting
Click Fan Speed button to set fan speed.
Note: Auto fan speed can be selected only in auto mode.
（
4
）
Error inquiry
When fresh air unit occurs error, click to check detailed error information.
5.5 e-Control Function
On the home page, pressing e-Control button can enter the page of e-Control.
e-Control includes 5 short-cut modes (Sleep, Bath, Home, Leaving and Stay
out) and 3 DIY modes.
User may reset the functions of different modes according to actual needs.
Fig.5.7 e-Control Page
(1) Turn on e-Control
Pressing the zone button can turn on the selected short-cut mode.
To Next Page
Loading...
