Fig.5.3 Advance Page
1) Functions of Sleep, Quiet, E-Heater, Absence and Rapid can only be
effective when unit is turned on.
2) When sleep function is on, quiet function will be turned on subsequently.
Sleep function will not be effective under auto, fan or floor heating mode.
3) Absence function can only be turned on in heating mode. When absence
function is on, set temperature is 8℃.
4) Rapid cool function can only be effective in cool mode. Likewise, rapid
heat function can only be effective in heat mode.
5) When shield all function is on, other shield buttons will be invalid.
6) When Shield Temp function is on, Sleep function is off.
5.3 Water/Floor control
On the water/floor home page, press the icon of water/floor unit to enter the
water/floor control interface.Press the icon of water/floor unit for 5 seconds to pop
up the name set of the selected indoor unit.
Water/Floor control parameters include water heating control parameter and
floor heating control parameter. It can be switched via button.
Notes:
① When there is only one function can be selected (water or floor), it can only
display the water heating or floor heating function interface, and cannot be
switched to another interface;
② Only when it is connected to hot water generator, water heating and floor
heating functions are applicable, the interface can be switched and
To Next Page
Loading...
