set.
(1)Name: can input number or letter (it should not be over 10 letters)
(2)Icon: press to select the preset icon.
(3)Engineering No.: it can be set to be 1-255.
(4)Press button to successfully save the setting. Then the indoor unit list
in the home page will display the new name and icon of indoor units.
5.10 Operation Notice
Press Setting on the homepage to enter the setting page.
Press the “Operation” button to switch to operation notice. The operation
method is the same with that of the local setting.
On the page of operation notice, user can view the information of the local unit,
customer service information, operation instructions and other notices.
6 Room View
On homepage, click Setting-
》
Local setting -
》
View selection. Select room view
and then enter room view homepage.
Note:
Room View function provides from version V2.2.0.
Fig. 6.1 Display Diagram of Room View Homepage
To Next Page
Loading...
