It displays the current water yielding temperature as default. The temperature
value will turn to the setting temperature and can be adjusted by pressing
and buttons; the temperature value will increase or decrease by every
pressing the button for once. The temperature value will be continuously increased
or decreased by long pressing the button.After 5 seconds without any action, the
temperature value will turn back to the current water yielding temperature.
Floor heating water yielding temperature range: 25
℃
~the highest water
yielding temperature of floor heating 45
℃
.
（
3
）
Function Setting of Floor Heating
Under the on/off status of floor heating, the functions can be set as below:
Auto, Fast, Absence, Shield
Auto function
：
the floor heating water yielding temperature will be automatically
provided by hot water generator according to the outdoor ambient temperature,
there is no need to set by the user, and the water temperature cannot be adjusted
via or buttons.
Fast function: start up the compressor and electric heating under the allowable
conditions of outdoor unit.
Absence function: when the user is absence, it will maintain certain degree of
water temperature to prevent the pipelines from being frozen up and prevent the
indoor equipment from being destroyed.
Shield function: it can conduct shield function by pressing of wired
controller to nullify such operation.
（
4
）
Malfunction View
When the floor heating fails to function well, press button to view the
information of malfunctions.
5.4 Fresh Air Control
On fresh air homepage, press the fresh air icon for 5 seconds to pop up the
fresh air name, project number and icon settings; click fresh air icon to enter fresh
air control interface.
To Next Page
Loading...
