Multi-VRF Centralized Controller
20
required set time. Press the button to enter the sterilize page,when the high
temperature sterilization is set to be “once”, then the sterilization will be valid for
once; when the high temperature sterilization is set to be “circular”, the sterilization
will be circularly valid, then it can set the circulated days and presetting sterilization
time. When the sterilization function is activated, the icon will flicker.
Fast function: start up the compressor and electric heating water under the
allowable conditions of outdoor unit, it displays ,the fast water heating function
can be set to be valid for once, when the water tank/hot water generator has
reached to heat preservation status, it displays ,the fast water heating function
will be cancelled for energy saving. After the water heating is closed down, the fast
water heating function is cancelled.
Shield function: it can conduct shield function by pressing of wired
controller to nullify such operation.
（
6
）
Malfunction View
When the water heater fails to function well, press to view the information
of malfunctions.
5.3.2 Floor control parameter
Fig. 5.5 Page of Floor Heating Control
（
1
）
On/off
Press the on/off button to trun unit on or off.
When the unit is off, the mode and temperature cannot be set.
（
2
）
Temperature Setting
To Next Page
Loading...
