Local setting includes:
(1) Sound, temperature unit, time format, mutual exclusion
Press the button to select one kind of setting.
(2) Language
Press the button can select system language, such as English,Simplified
Chinese or Traditional Chinese.
(3) Time setting
Set the date and time of the centralized controller system, can also set the
VRF unit time if needed.
(4) User password
Press the button can activate or inactivate user password.
When password is activated, it can be set or changed in 4~10 numbers or
characters. Original password is blank.
Press the button to save the password.
Note: If user password is activated, user needs to input password to enter the
control page when centralized controller is turned on or activated.
(5) Backlight setting
Pressing this button can set the timeout period of screen backlight. Screen will
be shut off and the centralized controller will enter sleep mode when the timeout
period is over.
Note: When centralized controller is in sleep mode, use can wake it up by
touching any part of the touch screen or the touch button at the right bottom of the
screen.
(6) Brightness
Pressing or dragging the sliding bar can adjust the backlight degree.
(7) Customer Service
User can set the name and phone number of the local customer service center
for the convenience of acquiring immediate solutions and technical support.
Press the
button to save the setting.
(8) Restore default settings
Press the “Reset” button to restore local setting, e-Control setting, group setting,
schedule setting, names and icons of indoor units, and other relevant ex-factory
default settings.
To Next Page
Loading...
