Gree GMV-PD160W/NAB-M

40
DC Inverter Multi
VRF Service Manual
DPOUSPM
No. Description Instruction to Displaying Contents
1 CENTER/GROUP
“GROUP” displayed during group control operation or grouping indoor units
“CENTER” displayed during center control ,center shield or center timer operation.
2 REGION NO. Online or selected region No. displayed(Note 1)
3 INDOOR UNIT NO. Online or sleected indoor unit no. displayed
4 System’s time display Display present time by week, hour and minutes
5 ROOM TEMP Room temperature of present indoor unit
6 SET TEMP Set temperature display
7 SHIELD All/terperature/mode/on/off shield from long distane
8 Timer setting display Weekly timer display
9 PROCESSING Displayed during sending out control command
10 GROUP NO. Group No. display
11 INDOOR UNIT Display region No.and unit no. of present indoor unit
12 ERROR Error display upon malfunction of any unit
13 Opearation mode Operation mode display of indoor unit
14 Fan speed display High, medium, low or auto fan speed display
15 SWING Swing operation mode display of indoor unit
7.2.4 Installation
After selection of installation location, perform the installation as follow:
&RQ¿UPLQVWDOODWLRQKROHVLWH
To be installed in the wall
(1) Dirll a hole of of 180mm×106mm×72mm (L×W×D)
180
110
72
Wall
Fig.7.2.4.1