Gree GMV-R series User Manual

Multi VRF Indoor
Unit Service Manual
47
CONTROL
Icon Name Function
Swing Swing function
Sleep Sleep states (3 types: sleep 1,sleep2 and sleep 3)
Running mode Running modes of the indoor unit (Cooling, Dry, Fan and Heating)
Cooling Cooling mode
Dry Dry mode
Fan Fan mode
Heating Heating mode
Defrost Defrosting state
Gate-control card Gate control
Lock Lock state
TURBO
TURBO Turbo state
Speed High, middle, low or auto fan speed of the indoor unit
Twinkle It blinks under on state of the unit without operation of any button.
F
Temperature Ambient/preset temperature value
Timing Timing state
SHIELD
SHIELD
Shield state (buttons, temperature, On/Off, Mode or Save is shielded by the remote
monitor).
MEMORY
MEMORY
Memory state (The indoor unit resumes the original setting state after power failure
and then power recovery)
MASTER
MASTER Master wired controller
SAVE
SAVE Energy-saving state
E-HEATER
E-HEATER Electric auxiliary heating state
BLOW
BLOW Blow state
QUIET
QUIET Quiet state(two types: quiet and auto quiet)

Gree GMV-R series Specifications

General

Brand	Gree
Model	GMV-R series
Category	Air Conditioner
Language	English