Gree GMV-R series

102
Multi VRF Indoor
Unit Service Manual
4�3 Wall Mounted Type
Assembly and Disassembly of the Fan Motor
Note: Be sure to cut off the power supply before the assembly and disassembly.
Steps Graphic Represenation Instructions
1. Remove the
front panel, front
panel assembly
and electric box

panel, front panel assembly and
electric box with a screwdriver.

the wiring terminal inside the electric
box, and then remove the ground screw
2. Remove the
evaporator
Screw

ends of the evaporator with a spanner
and then take the evaporator out.
3. Remove the
fan motor and the

Screw

plate of the motor with a screwdriver

