Gree Versati II Series

To Next Page

To Previous Page

Air to Water Heat Pump

Service Manual- Versati II Series

MAINTENANCE

. Remove gas valve

●

Loosen the bolts xing the gas valve.

●

Welding out the pipe connected to the gas valve [See

Fig�12]

Note: When welding, the valve should be covered by

wet cloth in order to avoid the high temp hurt.

.Remove liquid valve

●

Loosen the bolts xing the liquid valve.

●

Welding out the pipe connected to the liquid valve

[See Fig�12]

Note: When welding, the valve should be covered by

wet cloth in order to avoid the high temp hurt.

Fig.12

9) Remove compressor and gas-liquid separator

●

Remove the connection wire of compressor.[See

Fig�13]

●

Welding out the suction pipe and discharge pipe.[See

Fig�14]

●

Loosen the bolts xing the compressor and Remove

the compressor and gas-liquid separator.

Fig.13

Gree Versati II Series - Page 80