Gree Versati II Series - 4 DISASSEMBLY AND ASSEMBLY PROCEDURES

72
Air to Water Heat Pump
Service Manual- Versati II Series
MAINTENANCE
4 DISASSEMBLY AND ASSEMBLY PROCEDURE OF MAIN PARTS
Disassembly and assembly of external casing
Remark: Please rst cut off the power and discharge the Freon out of the unit
Operation Procedure
Illustration
OutdooUnit : GRS-CQ12Pd/NaB-K(O), GRS-CQ14Pd/NaB-K(O), GRS-CQ16Pd/NaB-K(O)
1) Remove the cover,front side plate
and right side plate�
●
Loosen the two tapping screws, and
remove the cover, the front side plate and
right side plate.[ Fig� 2]
Fig. 1
Fig. 2