GREEN INSTRUMENTS G36 - Table of Contents

G36 Oxygen Analyzer
Version 2.11 - March 2022 3
Content
1 INTRODUCTION 5
1.1 ABOUT THIS MANUAL 5
1.2 INQUIRIES AND FEEDBACK 6
1.3 ABOUT THE ANALYZER 6
2 SPECIFICATIONS 8
3 SAFETY ASPECTS 9
4 CONTROL AT DELIVERY 11
5 INSTALLATION & CONNECTIONS 12
5.1 WHERE TO INSTALL THE ANALYZER 12
5.2 ELECTRICAL CONNECTION 12
5.2.1 Power Supply 13
5.2.2 Sensor Connections - SEN 13
5.2.3 Relay Outputs – D-OUT 14
5.2.4 Input Connections – INPUT 16
5.2.5 Analog Output Connections – A-OUT 16
5.2.6 SD Card 16
5.2.7 Other Connections 18
6 MENU STRUCTURE 19
6.1 MAIN MENU 19
6.2 GRAPH MENU 20
6.3 INFORMATION MENU 22
6.4 CALIBRATION MENU 22
6.5 TOOLS MENU 23
6.6 NAVIGATING THE MENU STRUCTURE 25
7 CONFIGURATION & COMMISSIONING 26
7.1 SETTING OF BASIC DISPLAY PARAMETERS 26
7.2 SETTING OF ALARMS 27
7.3 SETTING OF ANALOG INPUTS 28
7.4 SETTING OF ANALOG OUTPUTS 29
7.4.1 Analog Output 1 29
7.4.2 Analog Output 2 31
7.5 BACK-FLUSHING & AUTO CALIBRATION 31
7.6 LOADING DEFAULT SETTINGS & FACTORY SETTINGS 33
7.7 COMMISSIONING OF THE ANALYZER 33
8 CALIBRATION 34
8.1 CALIBRATION WITH KNOWN OXYGEN GASES 34
8.2 ARTIFICIAL CALIBRATION OF OXYGEN SIGNAL 36