1.2 Inquiries and Feedback
All claims and inquiries for spare parts shall be addressed to Green Instruments A/S or
our distributors. In all correspondence, or when ordering spare parts, please carefully
state the equipment type and serial number, which can be found on the label on the
equipment.
Green Instruments A/S appreciates all feedback and suggestions for improvement. If any
questions appear or any discrepancies are found in this manual, kindly contact Green
Instruments:
Green Instruments A/S
Erhvervsparken 29
DK-9700 Brønderslev, Denmark
Phone: +45 9645 4500
Fax: +45 9645 4501
E-mail: sales@greeninstruments.com
Web: www.greeninstruments.com
1.3 About the Analyzer
The G36
Oxygen Analyzer continuously measures the content of oxygen with concentra-
tions up to 21.0%. The G
36
Oxygen Analyzer can be used to measure the content of oxy-
gen in N
2
or CO
2
based inert gas, in stack gas, or in connection with exhaust gas recircu-
lation (EGR).
The G36 Oxygen Analyzer uses a zirconia sensor. The zirconium dioxide sensors have
long been established as industry standards. The G36
uses a new type of zirconia sensor,
which can be used in a wide range of applications.
To Next Page
Loading...