Greenlee Textron / Subsidiary of Textron Inc.
14
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
555BAT™ Battery-Powered Bender
Operation
Wear eye protection when operating
the bender. Failure to wear eye
protection can result in serious eye
injury from flying debris.
Pinch points.
• Turn bender OFF before changing
accessories. Accidental start-up
can result in serious injury.
• Keep hands away from bending
shoe and rollers when bender is in
use. Conduit at the bending shoes
and rollers can crush a hand.
Do not remove guards.
Failure to observe this warning can
result in severe injury or death.
Keep terminal covers in place and the battery
compartment closed during operation and storage.
The battery compartment must be closed to protect
the batteries and battery cables from damage.
Failure to observe this warning can result in severe
injury or death.
Do not wear loose clothing when operating
the bender. Loose clothing can get caught in
moving parts.
Failure to observe this warning can result in
severe injury or death.
1. Turn the Power Switch/Circuit Breaker to ON.
2. Press BEND or UNLOAD until the shoe is
5° – 10° before the 0° starting point.
3. Load the conduit so that the bending mark is
aligned with the front edge of the shoe hook, as
illustrated.
Loading the Conduit
4. See the instruction decal for the appropriate bend
angle.
To Next Page
Loading...
