Greenlee 555C - Machine Overview and Setup; Identification and Specifications

Greenlee / A Textron Company 6 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
555C Electric Bender Classic
Identification
Height ....................................................................................................1118 mm (44")
Width ....................................................................................................724 mm (28.5")
Depth....................................................................................................521 mm (20.5")
Mass/Weight (bender without shoes or roller supports) ....................... 118 kg (260 lb)
Power Supply .................................................................................... 120 VAC, 20 amp
GFCI-protected receptacle
Operating Conditions
Temperature ........................................................ –20 °C to 49 °C (–5 °F to 120 °F)
Relative Humidity ........................................................................................ 0 to 98%
Capacity ................................................................ 1/2" to 2" conduit, schedule 40 pipe
555RC Electric Bender (shown)
1. Handle
2. Pendant
3. Protractor
4. Main Shaft
5. Bending Shoe
6. 1-1/2" to 2" Roller Support
7. 1/2" to 1-1/4" Roller Support
(in storage position)
8. Bending Instructions Decal
9. Circuit Breaker (ON/OFF switch)
Specifications
1
2
3
4
5
6
7
9
8