Greenlee Quick Draw Series - Punching Capacity; Stainless Steel Capacity; Mild Steel Capacity; Selection Guidance

Greenlee Tools, Inc.
9
Quick Draw
®
Hydraulic Knockout Drivers
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Note: Please consult the hydraulic punch instruction
manual for punch, drawstud, and die selection.
Capacity
Quick Draw
®
Hydraulic Punch Drivers
STAINLESS STEEL
Slug-Splitter and Large Diameter Punches
Pipe and Conduit Size Maximum Driver Rating
1/2" to 1-1/4" 10 ga (0.134", 3mm)
1-1/2" to 2" 12 ga (0.104", 2.5mm)
2-1/2" to 4" N/A
MILD STEEL
Standard and Slug-Buster Punches
Pipe and Conduit Size Maximum Driver Rating
1/2" to 2" 10 ga (0.134", 3mm)
2-1/2" to 4" N/A