CM220 Chipper 6. MAINTENANCE 6-1
©GreenMechLtd 6-1 08/17
ROUTINE MAINTENANCE SCHEDULE
CAUTION! Always remove key and check for rotation before carrying out any
maintenance.
Action Section Page
DAILY
Check engine oil level and coolant (ref: engine manual) 6.2 – 6.3 6-3
Check hydraulic oil level 6.4 6-3
Check fuel level 6.5 6-3
Check all drive belts 6.6 6-4
Check condition of disc blades and retaining bolts 6.7 6-4
Clean radiator screen and around radiator 6.8 6-5
Check feed roller control bar function 3.4 3-2
First 50 hours
Check drive belt tension 6.9 6-6
Check battery levels 6.13 6-6
Check wheel and tyre condition and pressures 6.14 6-6
Check brake condition and operation 6.15 6-6
Check hydraulic connections 6.17 6-7
Check all mountings 6.18 6-7
Check feed roller control bar function 3.4 3-2
Service engine Refer to engine manual
Weekly in addition to Daily actions
Blow out radiator core with air line 6.8 6-5
Check drive belt tension 6.9 6-5
Steam clean machine 6.10 6-5
Clean air cleaner 6.11 6-5
Check electrical connections 6.12 6-5
Check battery levels 6.13 6-6
Check feed roller control bar function 3.4 3-2
Check wheel and tyre condition and pressures 6.14 6-6
Check and adjust brakes 6.15 6-6
Grease all bearings and pivots 6.16 6-7
Check hydraulic connections 6.17 6-7
Check all mountings 6.18 6-7
250 hours in addition to Daily and Weekly actions
Check all fluid levels 6.2, 6.3, 6.4 6-3
Check brake condition and operation 6.15 6-6
Check condition of bearings and pivots 6.16 6-7
Service engine Refer to engine manual
Check axle mounting bolts for tightness 6.18 6-7
Replace return filter element 6.19 6-7
1000 hours in addition to 250 hour actions
Change hydraulic oil when replacing filter element 6.21 6-7
To Next Page
Loading...