GreenMech CHIPMASTER 220 - Engine Oil; Coolant; Hydraulic Oil; Fuel Level

CM220 Chipper 6. MAINTENANCE 6-3
©GreenMechLtd 6-3 08/17
6.2 Engine Oil
Check daily (fig 6.2). Refer to engine manual to refill.
6.3 Coolant
Check radiator level daily, including overflow tank (fig 6.3).
Refill as required. Check antifreeze.
CAUTION! Do not remove cap when engine is hot.
6.4 Hydraulic Oil
Check daily (fig 6.4). If below mark check for leaks and refill to
correct level.
1000 hours. Remove drain plug, Drain tank and refill with clean
oil of correct specification. Replace filter (Para. 6.16)
6.5 Fuel Level
Check daily before work and fill as required (fig 6.5).
CAUTION! Use clean diesel fuel only. If in doubt,
use a funnel with a filter.
CAUTION! Do not use any form of synthetic fuel.
Fig. 6.2 Engine dipstick
Dipstick
Fig.6.3 Coolant
Filler
Fig. 6.4 Hydraulic Oil
H
y
draulic Oil
Fig 6.5 Fuel Tank
Diesel Filler