CM220 Chipper 2. SPECIFICATIONS 2-2
©GreenMechLtd 2-2 08/17
Noise
Noise levels vary depending on type of material being processed. Also duration of
operation is variable. Noise emission tests have been carried out and guaranteed sound
power level (Lwa) is displayed on CE plate of each model as follows:
CM220 – Lwa 120dB
Minimise noise by switching to idle or stopping engine whenever chipping is not in
progress.
CAUTION! Operators must wear appropriate ear protection. Bystanders must be
kept away from proximity of machine.
Lifting Points
There is a central lifting point by chipper flywheel cover and two front lifting points at front
corners of machine.
CAUTION! Lift with extreme care. The machine may tilt because lifting points may
not be directly over centre of gravity.
Drawbar and hitch (when fitted)
Ball type hitch with overrun brake and safety cable.
CAUTION! Ensure that towing vehicle is correctly suited to trailer weight and
drawbar (nose) loading. If necessary check with national vehicle legislation.
To Next Page
Loading...