WARRANTY POLICY
PERIOD OF WARRANTY
All new machinery is supplied with a 3 year parts and labour warranty from
original date of purchase.
LIMITATIONS
This warranty applies only to manufacturing defect and does not cover repairs or costs
due to:
1. Normal wear and tear.
2. Routine maintenance or adjustment.
3. Damage caused by improper handling/abuse/misuse or neglect.
4. Lack of or over lubrication
5. Overheating due to lack of maintenance.
6. Damage due to fittings/fasteners becoming loose/detached through lack of
maintenance.
7. Damage caused by cleaning with water.
8. Machines serviced or repaired by non-authorised GreenMech dealers.
9. Machines incorrectly assembled or adjusted.
10. Damage caused by improper use of the machine.
11. Items/parts that are not normally covered by the warranty, including but not
limited to: Blade and Blade Assemblies - Belts - Filters - Clutch Assemblies -
Lubricants - Wheels & Tyres –Axles- Batteries – Bearings -Dampers - Paint
12. Consequential loss, damages or costs.
MAINTENANCE
Maintenance carried out during the warranty period should be carried out as per section
6 of the machine owner’s manual and by an authorised GreenMech dealer.
ENGINES
This is covered by the manufacturer of the engine. Please refer to the separate warranty
conditions as supplied with the owner’s manual.
All warranty repairs must be carried out by an authorised GreenMech dealer,
except for engines, please refer to separate warranty terms supplied with the
engine owner’s manual.
To Next Page
Loading...