Risk Assessment
Company Name: GreenMech Ltd Activity: CHIPMASTER 220 TWIN AXLE 360 (CM.220.MT.55.360.D)
Hazard At Risk Consequence ( C) Likelihood (L) Risk
Score
Controls Revised Final
Risk
Score
Those likely
to be affected
Likely injury
from hazard
Rating
Of incident
Rating
C
Rating
L
Rating
IMPACT
Struck by rotating
machine during
360 degree turn
OPERATOR
THIRD
PARTY
Broken bones,
bruises.
3 REMOTELY
POSSIBLE
2 6 Cordon off area. Restrict
access. Trained operator.
3 1 3
CUTTING
Sharp corners on
wheel cover, when
rotated from
locked position.
OPERATOR
THIRD
PARTY
Cuts and
bruises to legs.
2 POSSIBLE 3
6 As above. Position
bollards or similar adjacent
to sharp corners.
2 1 2
Key:
Consequence Score Likelihood Score To find risk Score multiply consequence
rating by the likelihood rating
Fatality 5 Very likely 5 Final revised risk score acceptable to the
company is 10 or less. If higher, further
controls are required.
Final revised likelihood score must be 2 or
less
Disability 4 Probable 4
Very serious (broken
limbs)
3 Possible 3
Important (3 day
accident)
2 Remotely possible 2
Noticeable (first aid) 1 Improbable 1
Assessment No: R015-5
Signed: ……………………………
Date: …………………………….
Review Date: …………………………….
To Next Page
Loading...