GREER Company Insight User Manual (English)

Other manuals for GREER Company Insight

Questions and Answers:

Brittany VegaAug 2, 2025

What to do if my GREER Company Control Panel shows “SWING SENSOR COMMS ERROR!”?

D
Daniel WrightAug 2, 2025
If your GREER Company Control Panel displays a “SWING SENSOR COMMS ERROR!”, it means the cable from the conditioning box to the computer is disconnected (either at the computer or the conditioning box) or the cable is grounded. First, check the cable and its connections at both the conditioning box and the computer. If needed, replace the cable. If the display shows load, angle, radius, etc., consider replacing the conditioning box.

Thomas CarterAug 17, 2025

Why does my GREER Company Insight Control Panel show “SWING SENSOR SIGNAL 1 ERROR!”, “SWING SENSOR SIGNAL 2 ERROR!”, “SWING SENSOR ERROR!”, or “SWING SENSOR LOGIC REPORT!”?

D
Donald RileyAug 17, 2025
If your GREER Company Control Panel displays errors such as “SWING SENSOR SIGNAL 1 ERROR!”, “SWING SENSOR SIGNAL 2 ERROR!”, “SWING SENSOR ERROR!”, or “SWING SENSOR LOGIC REPORT!”, this indicates that the cable from the sensor to the conditioning box is either disconnected or grounded. The suggested solution is to replace the sensor.

Brand	GREER Company
Model	Insight
Category	Control Panel
Language	English

Brand

GREER Company

Model

Insight

GREER Company Insight Calibration And Troubleshooting Manual

Table of Contents

Other manuals for GREER Company Insight

Questions and Answers:

GREER Company Insight Specifications