22
GETTING STARTED
SINGLE OPERATOR: using FOLLOW mode.
DUAL OPERATOR: a second operator can use a Remote Controller (SBUS,
SPEKTRUM, PPM) to control gimbal’s movement.
OPERATION MODES
LOCK MODE: is a stabilization mode where the camera maintains orientation
independently of the rest of the gimbal and the orientation can be changed by an
external control signal from remote control.
FOLLOW MODE: in this mode, the camera will mimic the operator’s movement
and allows one person to control camera tilt and pan without using an external
device like a remote control.
GREMSY T7 HAS 2
OPERATION MODES
GREMSY T7 SUPPORTS
To Next Page
Loading...