3
Notes on the sewing machine with regard to ambient conditions,
treatment, cleaning and safety
Ambient conditions
The recommended ranges are:
Ambient temperature 10° to 40°C (50° to 104°F)
Air humidity 20 % to 80 %
This machine is a high-quality electro-mechanical device. It is designed for household purposes and
should always be supervised when in use.
It should be operated in such a way that it is not subjected to: dust, severe dampness, direct sunlight,
static electricity, heat-producing objects, corrosive chemicals or liquids.
To permit adequate ventilation the machine must be kept unblocked and used on a firm and even surface.
Treatment
Always make sure not to damage your machine by knocking it over or dropping it.
Cleaning
Housing:
To clean the housing, use a dry, clean, soft, lint-free cloth. To remove any stubborn dirt, use a soft cloth
with a neutral cleansing agent for plastic materials.
Please Note!
Never use insecticides or chemical products such as petrol (gas) or thin chemicals to clean the housing.
Display:
If necessary, clean display with a soft cloth moistened with a little water.
Safety:
1. The machine should be put into operation as indicated on the specification plate.
2. Do not place any objects in openings on the machine.
3. Do not use the sewing machine if:
– there is visible damage,
– its function is defective,
– it is wet, e.g. with condensation.
4. Do not pull the lead cord out of the socket by its cord.
5. If this appliance is used for another purpose than that intended or if it is wrongly operated, we cannot
accept any liability for any damage caused.
6. To avoid the risk of electric shock, do not open the machine. There are no parts inside the machine
which the user can repair. This is the exclusive responsibility of our qualified service staff.
7. Be sure to use only original PFAFF parts.
To Next Page
Loading...
