Model G0755 (Mfg. Since 1/13)
-5-
The information contained herein is deemed accurate as of 5/14/2013 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G0755
Main Specifications:
Operation Info
Spindle Travel.............................................................................................................................................. 5 in.
Max Distance Spindle to Column............................................................................................................... 10 in.
Max Distance Spindle to Table.................................................................................................................. 18 in.
Longitudinal Table Travel (X-Axis)............................................................................................................. 17 in.
Cross Table Travel (Y-Axis).................................................................................................................. 7-7/8 in.
Vertical Head Travel (Z-Axis).............................................................................................................. 13-3/4 in.
Head Tilt (Left/Right)....................................................................................................................... 90 / 45 deg.
Drilling Capacity for Cast Iron................................................................................................................ 1-3/4 in.
Drilling Capacity for Steel...................................................................................................................... 1-1/4 in.
End Milling Capacity.............................................................................................................................. 1-1/4 in.
Face Milling Capacity............................................................................................................................ 3-1/8 in.
Table Info
Table Length........................................................................................................................................ 31-1/2 in.
Table Width........................................................................................................................................... 9-1/2 in.
Table Thickness.................................................................................................................................... 1-5/8 in.
Number of T-Slots............................................................................................................................................ 3
T-Slot Size................................................................................................................................................ 1/2 in.
T-Slots Centers...................................................................................................................................... 3-1/8 in.
Spindle Info
Spindle Taper............................................................................................................................................... R-8
Number of Vertical Spindle Speeds.................................................................................................................. 6
Range of Vertical Spindle Speeds............................................................................................. 90 – 1970 RPM
Quill Diameter.............................................................................................................................................. 3 in.
Drawbar Thread Size............................................................................................................................. 7/16-20
Drawbar Length................................................................................................................................... 17-3/4 in.
Spindle Bearings......................................................................................................... Tapered Roller Bearings
Construction
Spindle Housing/Quill........................................................................................................................... Cast Iron
Table....................................................................................................................... Precision-Ground Cast Iron
Head.................................................................................................................................................... Cast Iron
Column/Base....................................................................................................................................... Cast Iron
Base..................................................................................................................................................... Cast Iron
Stand.................................................................................................................................................... Cast Iron
Paint....................................................................................................................................................... Enamel
Other Specifications:
Country Of Origin ............................................................................................................................................... China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time .............................................................................................................. 1 Hour
Serial Number Location ........................................................................................................... ID Label on Headstock
ISO 9001 Factory .................................................................................................................................................. Yes
CSA Certified .......................................................................................................................................................... No
Features:
Motorized Head Elevation
Spindle Speeds Controlled w/Gearhead Levers
Longitudinal Variable-Speed Power Feed
Fine Downfeed Control
Adjustable Spindle Depth Stop
Reversible Spindle Rotation for Tapping Operations
High-Precision P5 (ABEC-5 Equivalent) Spindle Bearings
Dovetail Column
Scraped Dovetail Ways
To Next Page
Loading...
Need help?
General
