COPYRIGHT © MAY, 2016 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL18227 PRINTED IN CHINA
The following change was recently made to this machine since the owner's manual was printed:
• Removed wire between spindle direction knob and circuit board (see Figure 1), making speed range
identical in forward and reverse. Refer to updated wiring diagram on following page.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at (570) 546-9663 or techsupport@grizzly.com.
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G0759
***IMPORTANT UPDATE***
For Machines Mfd. Since 05/16
and Owner's Manual Revised 07/15
Figure 1. Location of wire removed.
Wire
Removed
To Next Page
Need help?
General
