-22-
Model G0785 (Mfd. Since 3/15)
SECTION 6: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Worn switch.
• Worn or damaged wires.
• Full collection bag.
• Any other unsafe condition.
Schedule
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. Do not lubricate them.
Lubrication
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Always wear a respirator and safety glasses
when emptying the dust collection bag
on the dust collector. Sawdust may cause
allergic reactions or respiratory problems.
Always empty the collection bags on a regular
basis. Emptying the collection bags allows the
machine to operate at a much higher level of effi-
ciency. To limit your exposure to dust particles,
we recommend that you tie off the bag and dis-
pose of it.
Always wear the appropriate respirator or dust
mask and safety glasses when emptying or dis-
posing of the collection bags. Small dust particles
can escape the bags during emptying, causing
them to become airborne and easily inhaled. This
microscopic airborne dust is extremely unhealthy
to breathe and can cause serious health prob-
lems.
While this dust collector excels at collecting the
majority of wood dust produced by your machines,
it is not an air filter; therefore, we strongly rec-
ommend the supplemental aid of a shop air filter
such as the Grizzly G0572 or G9956. Air filters
are designed to collect the smaller dust particles
that dust collector bags cannot trap.
Cleaning Bags
To Next Page
Loading...
