Model G0785 (Mfd. Since 3/15)
-23-
Replacing Bags
Replacement collection bags are available through
Grizzly as Model T24268.
To replace collection bag:
1. DISCONNECT MACHINE FROM POWER!
2. Make sure you are wearing safety glasses
and a respirator.
3. Release belt clamp securing collection bag,
then unhook bag from collector.
4. Securely close top of bag and safely dispose
of it according to local and federal standards.
5. Install a new collection bag.
Cleaning Canister
Filter
To clean the canister filter on the Model G0785,
move the canister cleaning handle back-and-forth
to free the trapped dust particles from the filter
pleats (see Figure 22). The particles will fall into
the collection bag.
Figure 22. Canister cleaning handle directions.
NOTICE
The use of compressed air or liquids to
clean the canister filter will damage the
filtration pleats of the filter. Use ONLY the
cleaning handle or, if necessary, a soft
brush to clean the inside of the canister
filter.
To Next Page
Loading...
