-22-
G0890/G0891 (Mfd. Since 06/19)
Recommended
Adjustments
The adjustments listed below have been per-
formed at the factory. However, because of the
many variables involved with shipping, we recom-
mend that you verify the adjustments to ensure
the best possible results from your new machine.
Step-by-step instructions for these adjustments
can be found in the SERVICE section starting on
Page 36.
Factory adjustments that should be verified:
• Tensioning/replacing V-belt (Page 39).
• Calibrating headstock elevation scale (Page 44).
After approximately 16 hours of opera-
tion, V-belt will stretch and seat into pulley
grooves and need to be properly tensioned
to avoid severely reducing life of V-belt.
Refer to Tensioning/Replacing V-Belt on
Page 39 for detailed instructions.
To Next Page
Loading...
Need help?
General
