-46-
Model G0948 (Mfd. Since 08/21)
order online at www.grizzly.com or call 1-800-523-4777
Figure 62. T21580 Bevel Edge Straight Edge.
T21580—36" Bevel Edge Straight Edge
These 36" Bevel Edge Straight Edges are made
from hardened steel with satin chrome finish and
are precision ground and lapped for straightness
and parallelism.
Figure 64. T32407 Grip Snap-Ring Plier Set.
T32407—Grip Snap-Ring Pliers Set, 10-Pc.
This plier set allows you to operate both internal
and external rings. Includes 4 bent and 4 straight
pliers made of heat-treated steel in sizes 5
1
⁄2" to
9". The 5" and 6" pliers have a 1.2mm (.047") tip;
the
7
1
⁄2" and 8" pliers have a 1.8mm (.07") tip;
and the
8
1
⁄2" and 9" pliers have a 2.3mm (0.9") tip.
The set includes one 5" hook, one 5" pick, and an
impact-resistant carrying case.
Figure 63. H7978 6" Fractional Digital Caliper.
H7978—6" Fractional Digital Caliper
Large LCD readout converts to decimal inch,
fractional inch, and millimeters with the push of
a button. Measure internal, external dimensions,
depth, steps, and differential measurements.
Features thumb roll and stainless steel construc-
tion. Range: 0-6", 0-150mm. Resolution: 0.0005",
0.01mm,
1
⁄128".
To Next Page
Loading...
